- Product number3868
- Grammage130 g/m2
Premium, matt, blueback poster paper for billboard applications
This weatherproof poster paper with high wet-strength and matt surface finish is suitable for printing with aqueous inks. Prints impress with high colour brilliance and very good image definition. The integrated blockout layer guarantees optimum flatness, even when printing with large ink densities. In combination with pigmented inks, Billboard Paper WR 130 is predestined for outdoor billboards. The opacity of the blueback ensures optimum coverage of substrates.
- At a glance
- Excellent colour brilliance
- Water-resistant and robust surface finish
- Blockout layer for optimum flatness, even when printing with large amounts of ink
- Opaque blueback ensures good coverage of substrates
- FSC® certified
- Physical dataNameWeight [g/m²]Value130ToleranceNormISO 536NameThickness (paper) [µm]Value160ToleranceNormISO 534NamepH valueValue6ToleranceNormDIN 53124
Finished RollsWidth x Length61.0 cm x 40 mCore2" øNo. rolls / pallet42Min. quantity / order12No. rolls / box1Width x Length91.4 cm x 40 mCore2" øNo. rolls / pallet42Min. quantity / order12No. rolls / box1Width x Length106.7 cm x 40 mCore2" øNo. rolls / pallet42Min. quantity / order12No. rolls / box1Width x Length127.0 cm x 40 mCore2" øNo. rolls / pallet42Min. quantity / order12No. rolls / box1Width x Length137.2 cm x 40 mCore2" øNo. rolls / pallet42Min. quantity / order12No. rolls / box1
Mill ReelsWidth x Length92.0 cm x 1,400.0 mCore6" øNo. rolls / pallet1Min. quantity / order1Width x Length108.0 cm x 1,400.0 mCore6" øNo. rolls / pallet1Min. quantity / order1Width x Length128.0 cm x 1,400.0 mCore6" øNo. rolls / pallet1Min. quantity / order1Width x Length138.0 cm x 1,400.0 mCore6" øNo. rolls / pallet1Min. quantity / order1
The converting and storage should take place in a climate from 35 to 65% to relative humidity at a temperature from 10 to 30°C. Keep the product in the original packaging (cardboard box and PE bag). It is always recommended that cotton gloves be used when handling InkJet coated materials to avoid fingerprints.
Designed for the ENCAD NovaJet PRO, Pro42e, Pro600e, HP CP-Series, HP DJ5000 (with pigmented ink from the OEM). Only for these printers, the product has been approved by the Swiss General Billboard Association (leading outdoor advertising company). For the HP-printers (CP-Series, DJ5000) we recommend our specially developped Billboard paper (see Product listings). If the paper is used with other printers, preliminary tests under corresponding conditions are strongly recommended. Blue back for reduced show through of over pasted posters. Irregular coloured parts on the back side can occur but do not influence the application and the printout quality. Real time tested with good results for 4 weeks in Central Europe. The Paper should be moistened for a maximum 4 hours and always glued immediately. Coating the receiving billboard with glue is recommended for optimal application. Henkel UST 2500N Zellura adhesive has been tested, no Glycol´s or other solubles should be added. Overlapping should be carried out with enough glue on the overlapped printed part. Water resistant wood glue can be added for better adhesive strength (compatibility should be considered). When using other printers as mentioned above, any new glues or application methods, difficulties like smearing of the inks when the paper is wet and folded or even peeling off when applicated can occur. These commbinations should be tested with some practice prints to gain confidence in the final output. 4-12 hours drying time is recommended before contact with any water/glue to achieve optimal water resistance. After moistening a shrinkage of up to 1% can occur in all directions.